Embedded Systems Mastery Path¶

Mastery Path

BOOTCAMP

VINOD BHANUJA

A structured, module-wise embedded systems training program that takes you from blinking your first LED to designing production-grade, master-level firmware — starting with Arduino/ESP32 and C/C++, with real compilable code in every module and a hands-on project at the end of each level.

No hardware required to start. Every Level 1 example runs in the free Wokwi online simulator — a browser-based Arduino/ESP32 simulator with virtual LEDs, buttons, sensors, and displays — and works unchanged on real boards when you get one.

How the program is organized¶

Level	Focus	Modules
Level 1 · Entry	Arduino/ESP32 with C/C++: GPIO, PWM, serial, I2C/SPI sensors, interrupts, WiFi	9 topics + 1 capstone
Level 2 · Intermediate	FreeRTOS, ESP-IDF, BLE, MQTT, OTA updates, filesystems, robust firmware	9 topics + 1 project
Level 3 · Advanced	Bare-metal ARM/STM32, registers & linker scripts, RTOS internals, DMA, PCB basics	9 topics + 1 project
Level 4 · Master	Production firmware, secure boot & OTA at scale, TinyML, RF design, manufacturing	9 topics + 1 capstone

How to use this site¶

Work through each level in order — later modules assume earlier ones.
Every topic page has real, compilable Arduino C/C++ sketches — paste them into the Wokwi simulator (or the Arduino IDE with a real board) and run them as you read.
Each level ends with a project that combines everything learned in that level.
Use the search bar (top of the page) to jump straight to a topic.

Start here → Level 1 · Entry

🎥 Prefer video? Watch the Mastery Path video series on YouTube — Shorts and full walkthroughs of these lessons.